Description
Sold here in our innovative DualDrive design, which benefits from an external hex for a socket fitment, and an internal Allen Key Drive. Each flat has been drilled to 1.6mm for ease of lock wiring as an extra safety feature. For those who truly value attention to detail.
Why not make your calipers look like new again and replace the mounting bolts at the same time?
Available for most models of caliper including Nissin and Tokico. Listed in model specific bike sections where fitment has been established or you can download the attached PDF which details a silhouette.
Stainless Steel is also available in black, which not only looks great but has other benefits too..
This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced.
Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.
Additional Information
Part No. | MLSSPINBP002R |
---|---|
Material | Stainless |
Product Type | Brake / Caliper |
Weight in Gms | 12.1100 |
Country of Manufacture | United Kingdom |
Allen Key Size | 4mm |
Length | 54mm |
Head Height | 5mm |
Shank Length | 36mm |
Shank Diameter | 5mm |
Thread Length | 10mm |
Socket Size | 8mm |
Pack Quantity | 1 |
Material Information

Manufactured from A316 stainless steel. A316 stainless steel has a minimum chromium content of 16.5% and contains elements of carbon, molybdenum, silicon, phosphorus, sulphur, nickel, manganese and iron, all of which add properties of formability, strength, weldability and enhanced corrosion resistance. All of the fasteners are highly polished to a mirror-like finish.
- Density 8030kg/m3 (501lb/ft3)
- Young's Modulus 193GPa (28 x 106psi)
- Yield Strength 260MPa (37.7 x 103)
- Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
- Compressive Strength 260MPa (37.7 x 103 psi)
- Shear Modulus78GPa (11.3 x 106 psi)
- Ductility 40% elongation at break +
- Minimum value allowed by ASTMA240
- Poisson's Ratio0.27
- Hardness 95 Rockwell B+
- Maximum value allowed by ASTMA240
- Strength-to-Weight Ratio 32.4 kNm/kg
- Stiffness-to-Weight Ratio 24.0 Mnm/kg
Black & Gold Stainless Steel: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.